transient layer meaning in Chinese
过渡层
转变层
Examples
- Transient layer approach was used in finite element method to simulate the temperature difference between the loading liquid and the model internal wall surface , and the results of calculation and test are accordant
采用过渡层模拟加载液体与模型内表面的温差，进行有限元计算，计算结果与试验结果相符。 - In the present dissertation , the densification mechanisms and the structure controlling of various transient layers of w - mo - ti flier - plates with graded wave impedance were mainly investigated . wholly dense w - mo - ti flier - plates were then prepared by powder stacking and hot - pressing . in order to achieve a required wave impedance profile and a quasi - continuous change along the thickness direction , the ratios of components in transient layers were well adjusted
论文采用粉末冶金方法，详细研究了w - mo - ti体系梯度飞片材料中各组元的烧结致密化机理与控制方法，以精细控制不同配比的混合粉末的铺填方式与铺填结构来减小梯度飞片材料内部波阻抗值的跃变幅度，成功制备出波阻抗按指定分布特征沿厚度方向准连续变化的、波阻抗面平行度高并且整体致密的w - mo - ti体系梯度飞片。 - The results show that , the process of quasi - isentropic compression on target can be seen as the successive overlap of a series of small shock loading waves generated by the transient layers . the design for flier - plates with graded wave impedance should conform to the parabolic or cubic function relationship between the impedance and the thickness
波阻抗按高幂次函数(幂次在二次至三次之间)分布的梯度飞片能够获得波形较好的准等熵压缩波，并且靶板的厚度不宜太小也不宜太大。